 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 Разрешение ошибки 734: Протокол управления PPP-связью был прерван |
|
||
 |
||
Триколор ТВ 
Интересные статьи
Полезный софт
Приложение Доцент
Партнерский раздел 
О нас| Разрешение ошибки 734: Протокол управления PPP-связью был прерван | |||||||||||||||||
Если при подключении интернета через сотовый телефон, Вы видите такое сообщение об ошибке:
то попробуйте предпринять следующие шаги: |
|||||||||||||||||
1. Проверьте строку инициализации модема: Для этого нажмите Пуск>Панель Управления>Система (если вы видите иконку Система, то в левом верхнем углу нажмите на надпись Переключение к классическому виду). Далее, в окошке Свойства системы, перейдите на вкладку Оборудование и нажмите на кнопку Диспетчер устройств.)
В появившемся окошке раскройте список Модемы и выберите тот модем, через который Вы работаете.
Щелкните два раза левой кнопкой мыши по Вашему модему. Перейдите во вкладку Дополнительные параметры связи и проверьте строку
Сохраните изменения и пробуйте снова подключится. 2. Смените номер набора: Для некоторых моделей телефонов не подходит номер *99***1# |
|||||||||||||||||
| Возможные ошибки при соединении с GPRS 600 - An operation is pending. 601 - The port handle is invalid. 602 - The port is already open. 603 - The buffer is too small. 604 - The wrong information is specified. 605 - Cannot set port information. 606 - The port is not connected. 607 - The event is invalid. 608 - The device does not exist. 609 - The device type does not exist. 610 - The buffer is invalid. 611 - The route is not available. 612 - The route is not allocated. 613 - Invalid compression is specified. 614 - You are out of buffers. 615 - The port is not found. 616 - An asynchronous request is pending. 617 - The port or device is already disconnecting. 618 - The port is not open. 619 - The port is disconnected. 620 - There are no endpoints. 621 - Cannot open the phone book file. 622 - Cannot load the phone book file. 623 - Cannot find the phone book entry. 624 - Cannot write to the phone book file. 625 - Invalid information is found in the phone book file. 626 - Cannot load a string. 627 - Cannot find a key. 628 - The port is disconnected. 629 - The port is disconnected from the remote machine. 630 - The port is disconnected due to a hardware failure. 631 - The port is disconnected by the user. 632 - The structure size is incorrect. 633 - The port is already in use or is not configured for Remote Access dial out. 634 - Cannot register your computer on the remote network. 635 - There is an unknown error. 636 - The wrong device is attached to the port. 637 - The string could not be converted. 638 - The request has timed out. 639 - There is no asynchronous net available. 640 - A NetBIOS error has occurred. 641 - The server cannot allocate NetBIOS resources needed to support the client. 642 - ERROR_NAME_EXISTS_ON_NET 643 - A network adapter at the server is not working. 644 - You do not receive network message pop-ups. 645 - There is an internal authentication error. 646 - The account is not permitted to logon at this time of day. 647 - The account is disabled. 648 - The password has expired. 649 - The account does not have Remote Access permission. 650 - The Remote Access server is not responding. 651 - Your modem (or other connecting device) has reported an error. 652 - There is an unrecognized response from the device. 653 - A macro required by the device is not found in the <device>.INF file section. 654 - A command or response in the <device>.INF file section refers to an undefined macro. 655 - The Message macro is not found in the <device>.INF file section. 656 - The Defaultoff macro in the <device>.INF file section contains an undefined macro. 657 - The <device>.INF file could not be opened. 658 - The device name in the <device>.INF or the <media>.INI file is too long. 659 - The <media>.INI file refers to an unknown device name. 660 - The <device>.INF file contains no responses for the command. 661 - The <device>.INF file is missing a command. 662 - The macro you are using is not listed in the <device>.INF file. 663 - The <media>.INI file refers to an unknown device type. 664 - Cannot allocate memory. 665 - The port is not configured for Remote Access. 666 - Your modem (or other connecting device) is not functioning. 667 - Cannot read the <media>.INI file. 668 - There is no connection. 669 - The usage parameter in the <media>.INI file is invalid. 670 - Cannot read the section name from the <media>.INI file. 671 - Cannot read the device type from the <media>.INI file. 672 - Cannot read the device name from the <media>.INI file. 673 - Cannot read the usage from the <media>.INI file. 674 - Cannot read the maximum connection BPS rate from the <media>.INI file. 675 - Cannot read the maximum carrier BPS rate from the <media>.INI file. 676 - The line is busy. 677 - A voice line is answering instead of a modem. 678 - There is no answer. 679 - Cannot detect carrier. 680 - There is no dial tone. 681 - There is a general error reported by a device. 682 - ERROR_WRITING_SECTIONNAME 683 - ERROR_WRITING_DEVICETYPE 684 - ERROR_WRITING_DEVICENAME 685 - ERROR_WRITING_MAXCONNECTBPS 686 - ERROR_WRITING_MAXCARRIERBPS 687 - ERROR_WRITING_USAGE 688 - ERROR_WRITING_DEFAULTOFF 689 - ERROR_READING_DEFAULTOFF 690 - ERROR_EMPTY_INI_FILE 691 - Access is denied because the username and/or password is invalid in the domain. 692 - There is a hardware failure in a port or an attached device. 693 - ERROR_NOT_BINARY_MACRO 694 - ERROR_DCB_NOT_FOUND 695 - ERROR_STATE_MACHINES_NOT_STARTED 696 - ERROR_STATE_MACHINES_ALREADY_STARTED 697 - ERROR_PARTIAL_RESPONSE_LOOPING 698 - A response keyname in the <device>.INF file is not in the expected format. 699 - The device response is causing a buffer overflow. 700 - The expanded command in the <device>.INF file is too long. 701 - The device moved to a BPS rate is not supported by the COM driver. 702 - A device response is received although it is not expected. 703 - ERROR_INTERACTIVE_MODE 704 - ERROR_BAD_CALLBACK_NUMBER 705 - ERROR_INVALID_AUTH_STATE 706 - ERROR_WRITING_INITBPS 707 - There is an X.25 diagnostic indication. 708 - The account has expired. 709 - There is an error changing the password on the domain. The password may be too short or may match a previously used password. 710 - A serial overrun error is detected while the modem is communicating. 711 - There is a RasMan initialization failure. Check the event log. 712 - A Biplex port is initializing. Wait a few seconds and redial. 713 - No active ISDN lines are available. 714 - No ISDN channels are available to make the call. 715 - Too many errors are occurring because of poor phone line quality. 716 - The Remote Access IP configuration is not usable. 717 - No IP addresses are available in the static pool of Remote Access IP addresses. 718 - The connection is timing out waiting for a valid response from the remote PPP peer. 719 - PPP is terminated by the remote computer. 720 - There are no PPP control protocols configured. 721 - The remote PPP peer is not responding. 722 - The PPP packet is invalid. 723 - The phone number including the prefix and suffix is too long. 724 - The IPX protocol cannot dial-out on the port because the machine is an IPX router. 725 - The IPX protocol cannot dial into the port because the IPX router is not installed. 726 - The IPX protocol cannot be used to dial out from more than one port at a time. 727 - Cannot access the Tcpcfg.dll file. 728 - Cannot find an IP adapter bound to Remote Access. 729 - SLIP cannot be used unless the IP protocol is installed. 730 - Computer registration is not complete. 731 - The protocol is not configured. 732 - The PPP negotiation is not converging. 733 - The PPP control protocol for this network protocol is not available on the server. 734 - The PPP link control protocol is terminated. 735 - The requested address is being rejected by the server. 736 - The remote computer is terminating the control protocol. 737 - There is a loopback detected. 738 - The server is not assigning an address. 739 - The authentication protocol required by the remote server cannot use the Windows NTencrypted password. Redial, and then type the password explicitly. 740 - There is an invalid TAPI configuration. 741 - The local computer does not support encryption. 742 - The remote server does not support encryption. 743 - The remote server requires encryption. 744 - Cannot use the IPX network number assigned by remote server. Check the event log. 745 - ERROR_INVALID_SMM 746 - ERROR_SMM_UNINITIALIZED 747 - ERROR_NO_MAC_FOR_PORT 748 - ERROR_SMM_TIMEOUT 749 - ERROR_BAD_PHONE_NUMBER 750 - ERROR_WRONG_MODULE 751 - There is an invalid callback number. 752 - There is a syntax error in a script that is processing. |
|||||||||||||||||
Спутниковое телевидение: Platforma HD | Телекарта | Триколор ТВ | Континент | НТВ Плюс | Радуга ТВ |
||
ICQ 226618 |
«Спутник КМВ», Пятигорск - Спутниковое телевидение, Спутниковый интернет |
|
Тел.: 8 (961) 456-99-99, 8 (928) 343-33-22; установка спутникового оборудования 8 (918) 767-90-30 |
||
